About us

« Sunrise - Sertic », Ltd Company provides professional services in certification field and getting permission documents. « Sunrise - Sertic », Ltd, being in charge for conformity conformation matters (accreditation attestation № KZ . O .16.0504) has been providing services in the Kazakhstan market of the certifying services since 2006y....


Подробнее...

The company's services «Sunrise - Sertic»

«SUNRISE-SERTIC», Ltd 1.Conformity confirmation (certification) of the following products: - Cooling equipment and thermal cabinets - Appliances for cooking - Appliances for the cooking process...


Подробнее...

Metrology

CERTIFICATE VALIDATION OF THE MEASUREMENT MEANS TYPE Certificate of the measurement means type validation (metrological certificate) is issued on the base of the Kazakhstan Republic Law ‘Provision of the Measurement Means’ dated June 7, 2000, No 53. Published in the Kazakhstan Republic List in 2000, No 7, art. 165; ‘Kazakhstan Pravda’...


Подробнее...

Examination of industrial safety

Kazakhstan Republic Emergency Ministry Permission for Usage of the Technical Devices in the Dangerous Industrial Facilities According to the Kazakhstan Republic Law ‘ The industrial safety in the dangerous Production facilities’ dated 03.04.2002 No 314-II while importing to KR or manufacturing new technical devices and materials, supposed to be...


Подробнее...

About us

« Sunrise - Sertic...

The company's servic...

«SUNRISE-SER...

Metrology

CERTIFICATE VA...

Examination of indus...

Kazakhstan Repu...

 

Kazakhstan Republic Emergency Ministry Permission for Usage of the Technical Devices in the Dangerous Industrial Facilities

 

According to the Kazakhstan Republic Law ‘ The industrial safety in the dangerous Production facilities’ dated 03.04.2002 No 314-II while importing to KR or manufacturing new technical devices and materials, supposed to be used in the dangerous industrial facilities it is necessary to get the permission for usage from the authorized body (Kazakhstan Republic Emergency Ministry Committee for the state Regulation of the Emergency and Industrial safety).

The KR Emergency Ministry permission is issued based on the 314-II Conclusion of the industrial safety expertize concerning the conformity of the definite types of the technical devices to the requirements of the acting law system, norms and documents regulations of KR in the industrial safety field.

The usage of the technical devices without permission of the KR Emergency Ministry is forbidden in the dangerous industrial facilities.

 

The industrial safety expertize is delivered by a specialized body attested by the KR Emergency Ministry on the base of the KR Law ‘Industrial safety in the dangerous facilities’ dated April, 3 2002y, No 314, it evaluates the conformity of the technological equipment, mechanisms, and apparatus, technical systems and complexes, devices and aggregates to the requirements of the normative documentation in the field of the industrial safety, it also evaluates the technical condition of the technical devices used in the dangerous industrial facilities.

 

The following documents are to be submitted to get the permission for usage and expertize:

- information of the producer;

- technical description, purpose, operation description of the technical devices (materials);

- technical specification, drawings of the technical devices (materials);

- instructions in assembly, operation, technical maintenance of the technical devices (materials) ;

- test reports of the technical devices / materials (conducted by the manufacturer or other certified laboratory);

- Kazakhstan certificates for conformity for the technical devices (materials);

- foreign certificates for conformity for the materials, components and the technical devices themselves.

And other documents, validating the safety and quality of the technical devices (materials).

 

« Sunrise - Sertic », Ltd Company provides professional services in certification field and getting permission documents.

« Sunrise - Sertic », Ltd, being in charge for conformity conformation matters (accreditation attestation № KZ . O .16.0504) has been providing services in the Kazakhstan market of the certifying services since 2006y.

« Sunrise - Sertic », Ltd has proved to be the developing company for the past six years, having such operation characteristics as high responsibility, individual treatment of every customer, high quality of service, short terms of the documents preparation, minimal wastes of your money.

If you collaborate with « Sunrise - Sertic », Ltd, you’ll get advantage of:

- modern equipment and apparatus

highly qualified personnel

-          wide range of services

We certify the electrical and technical products and transportation facilities. You may get acquainted with the whole list of our certified products in our site in the section ‘Our Services’.

If you make use of our services once you’ll make it twice, for the quality of the services is very high.

We are more than happy to be of immense assistance for you!

             

 

CERTIFICATE

VALIDATION OF THE MEASUREMENT MEANS TYPE

Certificate of the measurement means type validation (metrological certificate) is issued on the base of the Kazakhstan Republic Law ‘Provision of the Measurement Means’ dated June 7, 2000, No 53. Published in the Kazakhstan Republic List in 2000, No 7, art. 165; ‘Kazakhstan Pravda’ , dated June 13, 2000, No 147-148. The last amendments were introduced by the KR Law, dated 05. 07. 2008, No 62-IV.

Certificate of the measurement means type validation is issued by the Republican state body ‘Kazakh Institute of Metrology’ a constituent part of the Kazakhstan Republic Ministry of Industry and New Technologies Committee of Technical Regulation and Metrology functioning as an economical enterprise (RGP ‘KazInmMeter’).

The measurement means types are subjected to validation which are produced on a series basis or are imported to the Kazakhstan Republic territory. Validation is granted if the test results are positive for the the type validation. The decision to validate the measurement means type is adopted by the authorized body in the technical regulation and metrology.

The application form for the type validation should be attached by the following documents according to the KR Standard 2.21-2001 ‘          GSI. Norms and Regulations of the Measurements Means Types Testing and Validation’:

  • Test program scheme or changes scheme, and/or additions to the type program scheme;
  • Technical task (if its development is considered);
  • Technical specifications for the measurement means, produced in Kazakhstan Republic, signed by the Producing Manager and adopted in accordance with the KR Standard 1.3;
  • Operation documents; measurements means which are to be imported should be accompanied with the set of documents of the producing company attached to the measurement means, it should contain the following: assembly manual, and / or preparation of the measurement means for operation, operation and maintenance manual;
  • An outline of the Standard document verification if the operation documentation, regulating the means and methods of verification is lacking this information;
  • A scheme of the type description with the photos of the general view attached 13х18 or 18х24 in two copies;
  • The Applicant’s letter allowing to publish the type description in the newspapers and magazines;
  • Test program and methods for safety (if they are not available in the technical specifications) and/or test materials, verifying the standardized sustainability of the measurement means;
  • In case the serial products are manufactured – preliminary tests records of the experimental samples of the measurement means produced in the Republic;
  • Availability information of the measurement means verification facilities while their exploitation in the Kazakhstan Republic, and the information of the companies providing services and maintenance;
  • Documents proving the recommended interval limits of the verifications.

All the documents of the foreign manufacturer are accompanied with the translation into the state or Russian language.

Test results are submitted to the authorized state body, which passes a decision to validate or rejects to validate the measurement means type.

If the decision is positive and the measurement means type is validated, the type validation certificate is issued, the measurements means type is registered in the state system of provision of the measurement unity in the Kazakhstan Republic, the verification methods and type description are agreed upon.

The type validation certificate is effective for a longer period if the test results for the correspondence to the validated type, the corresponding changes enter the registration state provision system of the measurement unity in the Kazakhstan Republic.

The authorized state body can make a decision to validate a new measurement means type while modifying according to the test results for conformity to the validated type. If the modification doesn’t require the validation of a new type, if necessary, the corresponding changes are added to the type description and verification methods.

«Sunrise-Sertic», Ltd provides services for development and sending the documents to the RGP ‘KazInmMeter’, conducting the required tests for the type validation, monitoring of the documentation set and further to the obtaining the certificate of the measurement means type validation certificate.

The Certificate of the measurement means type validation preparation takes a period of 3 – 6 months.

 

 

 

«SUNRISE-SERTIC», Ltd

  1. 1.Conformity confirmation (certification) of the following products:

-          Cooling equipment and thermal cabinets

-          Appliances for cooking

-          Appliances for the cooking process mechanization

-          Private hygiene appliances

-          Electrical appliances for the linen processing

-          Appliances for the rooms cleaning

-          Appliances for the micro climate and soft warmth

-          Other electrical appliances

-          Electrical manual instrument

-          Devices for the farmers

-          Mounting component parts and connecting devices

-          Light technical items

-          Low voltage control apparatus

-          Information technology and office equipment

-          Cable products

-          Distributional and complex devices

-          Electrical machines

-          Transformers

-          Anti pollution equipment

-          Complex rig devices for the operational and deep prospecting drilling

-          Equipment for the oil and gas wells operation

-          Compress equipment

-          Pumps dynamic, extensional

-          Hydro pneumatic system equipment

-          Industrial equipment

-          Equipment for the liquid filtration and purification

-          Industrial tube fittings

-          Tubes, and spares for the pipelines

-          Vessels working under pressure, containers, capacities

-          Heating equipment

-          Heating boilers

-          Lifting and transportation equipment

-          Turbines

-          Auto transportation facilities

2. Industrial safety examination

- preparation of the decision of the commission of experts

Preparation of the technical passports for equipment

3. Declaration of the facility industrial safety

4. Testing by the non destructing control method

5. Consulting services:

- preparation of the documentation for getting the permissions, endorsements and licensees from the authorized bodies of the following ministries:

a) Kazakhstan Republic Emergency Ministry

b) Ministry of Transportation and Communications

c) Health care Ministry

d) Environment Protection Ministry

e) Ministry of Home Affairs

f) Ministry of Industry and New Technologies

- preparation of documents for the metrological certification.

 

 

Our address:

050060, c. Almaty

Zharokova str, 285 "a" 4th flour

Mobile phone:

+7 (771) 3002775

Tel:

+7 (727) 337-95-99
160005, c.Shymkent,
Mangeldin str, 33, Office 23.

Tel/Fax:
+7 (7252) 56-87-79
Tel:
+7 (7252) 31-83-72

+7 (7252) 31-87-11
This email address is being protected from spambots. You need JavaScript enabled to view it. ,
This email address is being protected from spambots. You need JavaScript enabled to view it.


You are here: ГлавнаяHomeУслуги